6.3 Online Security
6.3.1 Setting Online Security
6-11
6
Security
6.3.1
Setting Online Security
This section describes how to set restrictions on reading the data from the Machine Controller.
Use the following procedure to set online security.
1.
With the Machine Controller online, select
Online
−
Security Setting
from the menu bar.
The Security Setting Dialog Box will be displayed.
2.
Select the
Apply File Reading Restriction
Check Box, and then select the value of the
Restriction Privilege
Box from the list.
3.
Enter the password in the
Security Key
Box. Enter the same password again in the
Security Key Confirmation
Box, and then click the
Set
Button.
The
Set
Button will be enabled when one or more characters of text are entered in the
Security Key
Box.
The file reading restriction and the security key will be changed, and the following message will be
displayed to ask for confirmation.
4.
Click the
OK
Button.
Click the
Close
Button to close the
Security Setting
Dialog Box.
Save to flash memory, if necessary.