5.3 Monitoring Machine Operation
5.3.4 XY Trace
5-66
5.3.4
XY Trace
An XY trace gets the position data (target position and feedback position) of the X and Y axes
in every scan and displays them on a 2-dimensional plane graph, allowing for visual analysis of
the paths that the two axes take.
Starting the XY Trace
Double-click
Scope 1, Scope 2, Scope 3,
or
Scope 4
in the System Pane of MPE720 version
7, and then click the
XY Trace
Button in the Trace Type Dialog Box.
Alternatively, click the
Scope 1, Scope 2, Scope 3,
or
Scope 4
Button in the My Tool Tab
Page, and then click the
XY Trace
Button in the Trace Type Dialog Box.
You can also start it from the Launcher by selecting
Monitor
−
Trace
, and then clicking the
XY
Trace
Button in the Trace Type Dialog Box.
By default, only the
Scope 1
and
Scope 2
Buttons are displayed in the My Tool Tab Page.
Information