4.5 Transferring Data with the MPE720
4.5.5 Saving to Flash Memory
4-69
4
Creating User Programs
3.
Click the
Batch
Button or the
Individual
Button, and then the
Start
Button.
If you click the Batch Button, use the check boxes to indicate the data to transfer: System Configura-
tion, Program, Register, and/or Comment.
If you click the Individual Button, use the check boxes to indicate the data to transfer: System Config-
uration, Program, Register, and/or Comment. You can then specify the individual data to transfer.
4.5.5
Saving to Flash Memory
You can save the Machine Controller RAM data to the flash memory of the Machine Controller.
Use the following procedure to save the data.
1.
Select
Online - Save to Flash
from the menu bar.
The
Transfer Program - Save to Flash
Dialog Box will be displayed.
2.
Click the
Start
Button.
If the CPU Unit/CPU Module is running, the following message will be displayed. Click either the Yes
or the No Button to save the data to the flash memory.
You can save the data to flash memory only when the Machine Controller is connected (online).
Important