MOTO
MAN
4-1
ArcWorld II-200 System Manual
SECTION 4
INSTALLATION
The ArcWorld system can be installed easily in just a short time by three workers.
The more people involved (within reason), the more quickly installation can be
completed. Follow established safety procedures at all times throughout the
installation process. Failure to use safe work practices can result in damage to the
equipment and injury to the workers.
CAUTION!
Installation of the ArcWorld system is not a task for the novice. The
ArcWorld system is not fragile, but it is a highly sophisticated
robotic system. Handle components with care. Rough handling can
damage system electronic components.
4.1
Materials Required
All system hardware necessary for installing the ArcWorld system is included with
the system. This section identifies customer-supplied items and tools required to
complete installation.
4.1.1
Customer-Supplied Items
•
Gas bottles for the welding torches
•
Incoming power supply
•
Two earth ground cables with two earth ground stakes
•
Weld wire
•
Stepladder
•
Forklift and/or overhead crane
4.1.2
List of Tools
•
Safety glasses
•
Face shields
•
Gloves
•
Level
•
Ratchet with sockets
•
Adjustable wrench set
•
Hammer drill with appropriate
concrete bits
•
Phillips and flat screwdrivers
•
Hammer
•
Socket set
•
Forklift and/or overhead crane
•
Air-impact gun with sockets
•
Open-end wrench set
•
English allen wrenches
•
Metric allen wrenches
•
Wrench sets (standard and
metric)