manualshive.com logo in svg

YASKAWA MOTOMAN-EPX1750, Instructions Manual, Page: 22 / 66

Share
Download
YASKAWA MOTOMAN-EPX1750 Instructions Manual Download Page 22

4  Transport and Installation

4.3  Transport

4-3

154771-1CD

HW1480052

4.3

Transport

4.3.1

Transporting Method

• Sling and crane or forklift operations must be performed by authorized personnel only.

Failure to observe this caution may result in injury or damage.

• Avoid excessive vibration or shock during transport.

The system consists of precision components.  Failure to observe this caution may 
adversely affect performance.

• The mass of the manipulator is approximately 900 kg including the shipping bolts 

and brackets.  Use a wire rope strong enough to withstand the mass.

• The attached eyebolts are designed to support the manipulator mass.  Never 

use them for anything other than transporting the manipulator.

• Mount the shipping bolts and brackets before transporting the manipulator.
• With any transportation equipment, make sure to avoid external force on the arm 

or motor unit when transporting the manipulator.

CAUTION

NOTE

22 of 66

Summary of Contents for MOTOMAN-EPX1750



































































Reviews:

No comments