5
Replacing Parts
DX100
5.1
Replacing DX100 Parts
5-1
5
Replacing Parts
5.1
Replacing DX100 Parts
WARNING
•
Turn OFF the power supply before opening the DX100 doors.
Failure to observe this warning may result in electric shock.
•
After turning OFF the power supply, wait at least 5 minutes
before replacing a SREVOPACK (including the converter) or
CPS unit. Do not touch any terminals during this period.
Failure to observe this warning may result in electric shock.
CAUTION
•
To prevent anyone inadvertently turning ON the power supply
during maintenance, put up a warning sign such as "DO NOT
TURN ON THE POWER" at the primary power supply (knife
switch, wiring circuit breaker, etc.) and at the DX100 and
related controllers and use accepted lockout/tagout
procedures.
Failure to observe this caution may result in electric shock or injury.
•
Do not touch the regeneration resistors. They are very hot.
Failure to observe this caution may result in burn injuries.
•
After maintenance is completed, carefully check that no tools
are left inside the DX100 and that the doors are securely
closed.
Failure to observe this caution may result in electric shock or injury.