Technical data
6
-
36
6.4.2
Adjusting the S-Axis Pulse Limit
If you want to change the movement range of S-axis, follow the instructions in the System
Setup Manual, section: "Changing the Parameter Setting".
–
Pulse limit [positive direction (+) of S-axis]: SICxG400.
–
Pulse limit [negative direction (+) of S-axis]: SICxG408.
NOTICE
To change the movement range of the machine, set both the pulse limit and the angle of the
mechanical S-axis limit.
Fig. 6-4: Adjustable angle for the S-axis limit
Degree
± 15°
± 30°
± 45°
± 60°
± 75°
± 90°
Number of
pulses
-
-
±40242
-
±80483
-
±210651
Degree
± 120°
± 135°
± 150°
± 165°
±180
Number of
pulses
-
±160966
-
±201208
±241449
The angle in plus direction
= adjustable angle
The angle in minus direction
= non-adjustable angle
㻝㻤㻜㼻 㻝㻡㻜㼻 㻝㻞㻜㼻
㻥㻜㼻
㻢㻜㼻
㻟㻜㼻
㻜㼻 㻙㻟㻜㼻 㻙㻢㻜㼻
㻙㻥㻜㼻 㻙㻝㻞㻜㼻 㻙㻝㻡㻜㼻 㻙㻝㻤㻜㼻
㻙㻝㻤㻜㼻
㻙㻝㻡㻜㼻
㻙㻝㻞㻜㼻
㻙㻥㻜㼻
㻙㻢㻜㼻
㻙㻟㻜㼻
㻜㼻
㻟㻜㼻
㻢㻜㼻
㻥㻜㼻
㻝㻞㻜㼻
㻝㻡㻜㼻
㻝㻤㻜㼻
1
2
