4.3 The Drive and Programming Modes
♦ Simplified Setup Using the Setup Group
In the Setup Group, the drive lists the basic parameters needed to set up the drive for an elevator application. This group
expedites the startup process for an elevator application by showing only the most important parameters for the
application.
■ Using the Setup Group
Figure 4.7
illustrates how to enter and how to change parameters in the Setup Group.
The first display shown when entering the Setup Group is the Control Method menu. Skipping this display will keep the
current Setup Group parameter selection. The default setting for the Setup Group is a group o f parameters most
commonly use in control methods.
In this example, the Setup Group is accessed to change b1-01 from 0 to 1. This changes the source o f the speed reference
from the digital operator to the control circuit terminals.
- MODE - DRV Rdy
- MODE -
PRG
Speed Ref (OPR)
U1-01= 0.00%
Quick Setting
U1-02= 0.00% IRSEQI
U1-03=
0
.
00
A IlR epI
<
—
s
pWD
l i H I P pWD ID A i l l
S p e e d r e fe r e n c e
a p p e a r s w h e n
p o w e r e d up
E l
- SETUP - PRG Rdy
Control Method
2 .2.
Open Loop Vector
iH i.v .e
p w d
i d a t
^
o j f a
□
- SETUP - PRG Rdy
Speed Ref Sel
Operator
fio m e
p w d
i s
a j J a
- SETUP - PRG Rdy
Up/Dn Command Sel
0 2 = 1 .1.
Digital Inputs
IHMiWJ
p w d
- SETUP - PRG Rdy
Speed Ref Sel
b1-01= 0 .0.
Operator
C o n tr o l C ir c u it
T e rm in a l
Entry Accepted
<2>
- SETUP - PRG Rdy
Speed Ref Sel
b1-01= 0 .0.
Analog Input
“1"
Щ^Ш
p w d
O p e r a to r
<2>
<1> Use the up and dow n arrow keys to scroll through the Setup Group. Press the EN TER key to view or change param eter settings.
<2> To return to the previous menu w ithout saving changes, press the ESC key.
F ig u r e 4 .7 S e t u p G r o u p E x a m p le
0 .0.
86
YASKAWA ELECTRIC SIEP C710616 33D YASKAWA AC Drive L1000A Technical Manual
