2.2 Mechanical Installation
■ Digital Operator Remote Installation
Digital Operator Dimensions
In s ta lla tio n h o le s (2 -M 3 s c re w s , d e p th 5)
U nit: m m
F ig u r e 2 .4 D igital O p e r a to r D im e n s io n s
Installation Types and Required Materials
The digital operator mounts to an enclosure two different ways:
1. External/face-mount installs the operator outside the enclosure panel
2. Internal/flush-mount installs the operator inside the enclosure panel
Table 2.2 Digital Operator Installation Methods and Required Tools
Installation Method
Description
Installation Support Sets
Model
Required Tools
External/Face-Mount
Sim plified installation with the digital
operator is mounted on the outside of
the panel with two screws.
-
-
Phillips screwdriver (#1)
Internal/Flush-Mount
Encloses the digital operator in the
panel. The digital operator is flush
with the outside o f the panel.
Installation Support Set A
(for mounting with screws through
holes in the panel)
EZZ020642A
Phillips screwdriver (#1, #2)
Installation Support Set B
(for use with threaded studs that are
fixed to the panel)
EZZ020642B
Phillips screwdriver (#1)
Wrench (7 mm)
N OTICE:
P re v e n t fo re ig n m a tte r s u c h as m e ta l s h a v in g s o r w ire c lip p in g s from fa llin g in to the drive d u rin g in s ta lla tio n a n d p ro je c t
con stru ction . F a ilu re to c o m p ly c o u ld re s u lt in da m a g e to the drive. P la ce a te m p o ra ry c o v e r o v e r the top o f the drive du rin g
in sta lla tion . R e m o v e the te m p o ra ry c o v e r b e fo re drive s ta rt-u p , as th e c o v e r w ill re d u c e v e n tila tio n a n d ca u se the drive to overheat.
External/Face-Mount
1. Cut an opening in the enclosure panel for the digital operator as shown in
Figure 2.6.
2. Position the digital operator so the display faces outwards, and mount it to the enclosure panel as shown in
Figure 2.5.
YASKAWA ELECTRIC SIEP C710616 33D YASKAWA AC Drive L1000A Technical Manual
37
M
e
c
h
a
n
ic
a
l
In
s
ta
ll
a
ti
o
n
