6 Check after Energizing the Drive
YASKAWA
TOEPC7306000BA HOA Keypad Installation Manual
43
Note:
Different settings and conditions will change the keypad display.
A -
A1-02 [Control
Method Selection]
settings
B -
o2-04 [Drive Model
(KVA) Selection]
settings (2 or 3 digits)
C - Presence of
DriveWorksEZ
parameter backup
D - Parameter backup
data is not registered
E -
Backup data does not
contain the date
Information
F -
Backup date
◆
Verify Keypad Parameters and Drive Parameters
This procedure verifies that the parameter setting values that were
backed up in the keypad agree with the parameter setting values in
the drive.
Note:
•
Always stop the drive before you start to verify the parameters.
•
The drive will not accept a Run command while it verifies parameters.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper
right-hand corner of the screen.
• If the screen does not show [Home] for
, push
(Back),
and then push
to show [Home].
