YASKAWA
TOEP C730600 97C LCD Keypad Installation Manual
51
◆
Change Parameter Setting Values
This example shows how to change the setting value for
C1-01
[Acceleration Time 1]
. Do the steps in this procedure to set
parameters for the application.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper
right-hand corner of the screen.
• If [Home] is not shown above the
, push
(Back).
2.
Push
(Menu).
3.
Push
or
to select [Parameters], then push
.
