10
YASKAWA
SIEP C730600 0IB Modbus TCP/IP Technical Manual
4
Option Components
◆
Option PCB Components
A - Connector (CN5)
B - Installation hole
C - LED (NS)
D - LED (MS)
E - Ground terminal (FE) and installation hole
F - Port 2 LED (10/100)
G - Option modular connector CN1B (Port 2) (RJ45)
H - DIP switch S1
I - Port 2 LED (LINK/ACT)
J - Port 1 LED (10/100)
K - Option modular connector CN1A (Port 1) (RJ45)
L - Port 1 LED (LINK/ACT)
Figure 4.1 Option PCB Components
*1
Refer to
for more information about the LEDs.
*2
Connect the included ground wire during installation. The ground wire is not necessary for installation on GA700, GA800, and
CR700 drives. For GA500 drives, connect the included ground wire to the separately-sold communication option case (model:
JOHB-GA50).
◆
Communication Connector
Option connections CN1A (Port 1) and CN1B (Port 2) are connection points for customer-supplied Modbus TCP/
IP network communication cables. These ports accept customer-supplied male 8-way Ethernet modular RJ45
connectors.
Table 4.1 Male 8-way Ethernet Modular Connector (Customer-Supplied)
Male 8-way Ethernet Modular Connector
Pin
Description
1 (Pair 2)
Transmit data (TXD) +
2 (Pair 2)
Transmit data (TXD) -
3 (Pair 3)
Receive data (RXD) +
4 (Pair 1)
Not used
5 (Pair 1)
Not used
6 (Pair 3)
Receive data (RXD) -
7 (Pair 4)
Not used
8 (Pair 4)
Not used
◆
Option LED States
A - 1000-Series, Z1000U
B - GA500, GA700, GA800, CR700
C - Z1000, HV600, FP605
Figure 4.2 Option LED Labels
*1
LED label has transparent background and white letters. Please make sure that you use the correct label for Z1000, HV600, or
FP605.
