YASKAWA iC9200 Series, Operating Manual, Page: 176 / 220

176 HB700 | CPU | PMC921xEx | en | 24-04
Web-based management - WBM
iC9200 Series
Overview > Cockpit
Cockpit toolbar
6.2 Overview
6.2.1 General Data
Here you will find general details about the CPU, e.g. hardware and firmware versions,
order number as well as vendor information.
General Data
Overview
Diagnostics
Configuration
Security
Administration
iC92...
PMC92...
Overview
General Data
Cockpit
6.2.2 Cockpit
Here you will find the Cockpit toolbar and information about the time, status and utilization
of the CPU.
Overview
Cockpit
Diagnostics
Configuration
Security
Administration
YRCP-MP4P
YRCP32F0
Overview
General Data
Cockpit
The toolbar provides access to the following functions:
■
: Stop - Stops program execution on the CPU.
■
: Hot Start - Performs a hot start. The CPU is restarted and the program continues
without initializing the variables.
■
: Warm Boot - Performs a warm boot. The CPU is restarted and the program con-
tinues with initializing the variables. The values of the variables marked with “Retain”
in iCube Engineer are retained.
■
Cold Start - Performs a cold start. CPU is restarted and the program continues with
initializing all the variables.
■
: Memory download - Saves the retain data locally in a file.
■
: Memory upload - Restores the saved retain data.
■
: Reboot - Performs a reboot. The operation corresponds to a power off/on process.
The loaded application (code and network configuration) is deleted from the RAM. The
controller restarts with the last saved settings and, if available, loads the boot project
from the flash memory.