552
YASKAWA
TOEPYAIHV6002A HV600 Drive Programming
4.
Push
/
to select [Show Initial Setup Screen], then push
.
5.
Push
/
to select [No], then push
.
• [No]: The keypad will not show the Initial Setup Screen when the drive is energized.
• [Yes]: The keypad will show the Initial Setup Screen when the drive is energized.
◆
Start Data Logging
The data log function saves drive status information. Monitors
Ux-xx
are the source of log information. The procedure
in this section shows how to start logging data.
You can record a maximum of 10 monitors.
1.
Insert a microSD card in the keypad.
2.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
, push
(Back), and then push
to show [Home].
3.
Push
(Menu).
4.
Push
or
to select [Diagnostic Tools], then push
.
