542
YASKAWA
TOEPYAIHV6002A HV600 Drive Programming
4.
Push
or
to select the item to verify, then push
.
5.
Push
or
to select [Delete (keypad)], then push
.
6.
Push
or
to select the data to delete, then push
.
The keypad will show the
“
End
”
message when the write process is complete.
◆
Checking Modified Parameters
■
Modified Parameters Screen Displays
The keypad display for Modified Parameters screen changes when the
A1-06 [Application Preset]
and
A1-07
[DriveWorksEZ Function Selection]
settings change:
A1-06 Settings
A1-07 Settings
Keypad Display
Description
0
0
When you set
A1-06 = 0 [No Preset Selected]
and
A1-07 = 0 [DWEZ Disabled]
, the
Modified Parameters screen will only show [Standard].
1 - 8
0
When you set an application macro (
A1-06 ≠ 0
), the Modified Parameters screen will show
the Standard menu and Application Presets menu.
•
Standard: This menu shows all parameters modified by the
A1-06
setting and any
standard drive parameters modified after you changed the
A1-06
setting.
•
Application Presets: This menu only shows parameters not set by
A1-06
.
0 - 8
1
When
A1-07 = 1 [DWEZ Enabled]
, the keypad will also show the DWEZ menu selection.
If the modified parameters are returned back to Application Preset default, causing the
numbers of parameters modified for Application Preset to be 0, the user will be returned
back to the User Modified Parameters menu screen with the Standard list selected.
