540
YASKAWA
TOEPYAIHV6002A HV600 Drive Programming
Note:
Different settings and conditions will change the keypad display.
A -
A1-02 [Control Method Selection]
settings
B -
o2-04 [Drive Model (KVA) Selection]
settings (2 or
3 digits)
C - Presence of DriveWorksEZ parameter backup
D - Parameter backup data is not registered
E - Backup data does not contain the date
Information
F - Backup date
◆
Verify Keypad Parameters and Drive Parameters
This procedure verifies that the parameter setting values that were backed up in the keypad agree with the parameter
setting values in the drive.
Note:
•
Always stop the drive before you start to verify the parameters.
•
The drive will not accept a Run command while it verifies parameters.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
, push
(Back), and then push
to show [Home].
2.
Push
(Menu).
3.
Push
or
to select [Parameter Backup/Restore], then push
.
4.
Push
or
to select the item to verify, then push
.
