538
YASKAWA
TOEPYAIHV6002A HV600 Drive Programming
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
, push
(Back), and then push
to show [Home].
2.
Push
(Menu).
3.
Push
or
to select [Parameter Backup/Restore], then push
.
4.
Push
or
to select the items to back up, then push
.
5.
Push
or
to select [Backup (drive → keypad)], then push
.
6.
Push
or
to select a memory location, then push
.
The keypad shows
“
End
”
when the backup procedure completes successfully.
◆
Write Backed-up Parameters to the Drive
You can back up parameters on the keypad and write them to different drives.
Note:
•
Always stop the drive before you start to restore the parameter backups.
•
The drive will not accept a Run command while it restores parameters.
