YASKAWA HV600, Manual

Page: 422 / 610

2.11 o: Keypad-Related Settings
422 YASKAWA TOEPYAIHV6002A HV600 Drive Programming
Note:
The maintenance period changes for different operating environments.
■
o4-07: Softcharge Relay Maintenance Set
No.
(Hex.)
Name Description
Default
(Range)
o4-07
(0523)
Softcharge Relay
Maintenance Set
Sets the U4-06 [PreChargeRelayMainte] monitor value.
0%
(0 - 150%)
When you replace a drive, set o4-07 = 0 to reset U4-06 . When the o4-07 setting changes, the count of U4-06 starts
again as specified by the setting of o4-07 . After you complete the configuration, o4-07 automatically resets to 0 .
Note:
The maintenance period changes for different operating environments.
■
o4-09: IGBT Maintenance Setting
No.
(Hex.)
Name Description
Default
(Range)
o4-09
(0525)
IGBT Maintenance Setting
Sets the U4-07 [IGBT Maintenance] monitor value.
0%
(0 - 150%)
When you replace a drive, set o4-09 = 0 to reset U4-07 . When the o4-09 setting changes, the count of U4-07 starts
again as specified by the setting of o4-09 . After you complete the configuration, o4-09 automatically resets to 0 .
Note:
The maintenance period changes for different operating environments.
■
o4-11: Fault Trace/History Init (U2/U3)
No.
(Hex.)
Name Description
Default
(Range)
o4-11
(0510)
Fault Trace/History Init (U2/
U3)
Resets the records of Monitors U2-xx [Fault Trace] and U3-xx [Fault History] .
0
(0, 1)
Note:
When you initialize the drive with A1-03 [Initialize Parameters] , the drive will not reset the records for U2-xx and U3-xx .
0 : Disabled
Keeps the records of Monitors U2-xx and U3-xx .
1 : Enabled
Resets the records for Monitors U2-xx and U3-xx . After the reset, the drive automatically resets o4-11 to 0 .
■
o4-12: kWh Monitor Initialization
No.
(Hex.)
Name Description
Default
(Range)
o4-12
(0512)
kWh Monitor Initialization
Resets the monitor values for U4-10 [kWh, Lower 4 Digits] and U4-11 [kWh, Upper 5 Digits] .
0
(0, 1)
Note:
When you initialize the drive with A1-03 [Initialize Parameters] , the drive will not reset U4-10 and U4-11 .
0 : No Reset
Keeps the monitor values for U4-10 and U4-11 .
1 : Reset
Resets the values of U4-10 and U4-11 . After the reset, the drive automatically resets o4-12 to 0 .
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV