YASKAWA GA80U4720ABM, Manual

Page: 182 / 1016

4.6 Keypad Operation
182 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
◆
Start Data Logging
The data log function saves drive status information. Monitors Ux-xx are the source of log information. The procedure
in this section shows how to start logging data.
You can record a maximum of 10 monitors.
1.
Make sure that a microSD card is inserted in the keypad.
2.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for , push (Back), and then push to show [Home].
3.
Push (Menu).
4.
Push or to select [Diagnostic Tools], then push .
5.
Push or to select [Data Logger], then push .
6.
Push or to select [Yes] or [No], then push .
• [Yes]: Data logging starts.
• [No]: Data logging will not start.
If the drive was logging data when you entered the command, the keypad looks like this: