584
YASKAWA
TOEPYAIGA8002B GA800 Drive Programming
7.
Push
or
to select the monitor number to be logged, then push
.
The configuration procedure is complete.
■
Set the Sampling Time
The procedure in this section shows how to set the sampling time for data logging.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
, push
(Back), and then push
to show [Home].
2.
Push
(Menu).
3.
Push
or
to select [Diagnostic Tools], then push
.
4.
Push
or
to select [Data Logger], then push
(Setup).
5.
Push
or
to select [Log Sampling Interval], then push
.