YASKAWA GA500 series, Programming, Page: 469 / 526

Startup
Procedure
and
T
est
Run
3
3.3 Keypad Operation
YASKAWA TOEPYAIGA5002A GA500 Programming 469
Push and hold to go back to the frequency reference screen.
◆
Write Backed-up Parameters to the Drive
Show the frequency reference screen in advance.
Note:
Push and hold to go back to the frequency reference screen from any screen.
Use these steps to write the parameters backed up in the keypad into a different drive.
Note:
•
Make sure that you stop the drive before you restore the backed-up parameters.
• The drive does not accept Run commands while it is restoring parameters.
Figure 3.15 Writing backed up parameters
Push and hold to go back to the frequency reference screen.
◆
Verify Keypad Parameters and Drive Parameters
Show the frequency reference screen in advance.
Note:
Push and hold to go back to the frequency reference screen from any screen.
This procedure verifies that the parameter setting values that were backed up in the keypad agree with the parameter
setting values in the drive.
Note:
•
Make sure that you stop the drive before you examine parameters.
• The drive does not accept Run commands while it is restoring parameters.