YASKAWA GA500 series, Programming, Page: 467 / 526

Startup
Procedure
and
T
est
Run
3
3.3 Keypad Operation
YASKAWA TOEPYAIGA5002A GA500 Programming 467
Figure 3.11 How to Examine the Changed Parameters
◆
Set and View Necessary Parameters
Show the frequency reference screen.
Note:
Push and hold to return to frequency reference screen from any screen.
The setup mode shows the parameters set in A2-01 to A2-32 [User Parameter 1 to User Parameter 32] . This lets you
quickly access and change these parameters.
Note:
Setup mode always shows ( A1-06 [Application Preset] ) at the top of the list. When you change the setting, the settings for A2-
01 to A2-32 change.
Figure 3.12 View and Set the Necessary Parameters
Continue to change the parameters or press and hold to go back to the frequency reference screen.
◆
Change Parameter Settings
Show the frequency reference screen in advance.
Note:
Push and hold to go back to the frequency reference screen from any screen.
This example shows how to change C1-01 [Acceleration Time 1] . Set the parameter to the necessary value.