YASKAWA GA500 series, Programming, Page: 282 / 526

2.7 F: Options
282 YASKAWA TOEPYAIGA5002A GA500 Programming
■
F7-12: Gateway Address 4
No.
(Hex.)
Name Description
Default
(Range)
F7-12
(03F0)
Gateway Address 4
Sets the fourth octet of the gateway address of the connected network.
1
(0 - 255)
Note:
Set this parameter when F7-13 = 0 [Address Mode at Startup = Static] .
■
F7-13: Address Mode at Startup
No.
(Hex.)
Name Description
Default
(Range)
F7-13
(03F1)
Address Mode at Startup
Sets the method to set option card IP addresses.
2
(0 - 2)
0 : Static
1 : BOOTP
2 : DHCP
Note:
• The following setting values are available when using the PROFINET communication option card (SI-EP3).
– 0: Static
– 2: DCP
•
When F7-13 = 0 , set parameters F7-01 to F7-12 [IP Address 1 to Gateway Address 4] to set the IP Address. Be sure to set a different IP
address for each drive on the network.
■
F7-14: Duplex Mode Selection
No.
(Hex.)
Name Description
Default
(Range)
F7-14
(03F2)
Duplex Mode Selection
Sets the duplex mode setting method.
1
(0 - 8)
0 : Half/Half
1 : Auto/Auto
2 : Full/Full
3 : Half/Auto
Port 1 is set to “ Half ” and port 2 is set to “ Auto ” .
4 : Half/Full
Port 1 is set to “ Half ” and port 2 is set to “ Full ” .
5 : Auto/Half
Port 1 is set to
“
Auto
”
and port 2 is set to
“
Half
”
.
6 : Auto/Full
Port 1 is set to
“
Auto
”
and port 2 is set to
“
Full
”
.
7 : Full/Half
Port 1 is set to “ Full ” and port 2 is set to “ Half ” .
8 : Full/Auto
Port 1 is set to
“
Full
”
and port 2 is set to
“
Auto
”
.
■
F7-15: Communication Speed Selection
No.
(Hex.)
Name Description
Default
(Range)
F7-15
(03F3)
Communication Speed
Selection
Sets the communications speed.
10
(10, 100 - 102)
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV