22
YASKAWA ELECTRIC
TOEP C710687 03B FSDrive-MV1000 Parameter Guide
1.1 Understanding the Parameter Table
1.1 Understanding the Parameter Table
u
Control Modes, Symbols, and Terms
The table below lists terms and symbols used in this section to indicate which parameters are available in which control
modes.
Note:
For a detailed explanation of each control mode, refer to the FSDrive-MV1000 Instructions (Manual No. TOEP C710687 02).
Table 1.1 Symbols and Icons Used in Parameter Descriptions
Symbol
Description
Indicates the parameter is accessible in all control modes.
Parameter is available when operating the drive with V/f Control.
Parameter is available when operating the drive with Open Loop Vector.
Parameter is available when operating the drive with Closed Loop Vector.
Indicates this parameter can be changed during run.
Motor 2
Refers to a second motor when the drive is operating two motors. Switch between these motors using the contact input
terminals.
All Modes
V/f
OLV
CLV
MV1000ParameterGuide_E_conditional.book 22 ページ ２０１３年１０月１１日 金曜日 午後８時１８分
