YASKAWA CIPR-GA50C series, Technical Manual

Page: 129 / 766

Startup
Procedure
and
T
est
Run
4
4.7 Keypad Operation
YASKAWA SIEPC71061753A GA500 Technical Manual 129
Figure 4.16 How to Examine the Changed Parameters
◆
Set and View Necessary Parameters
Show the frequency reference screen.
Note:
Press and hold a to return to frequency reference screen from any screen.
The setup mode shows the parameters set in A2-01 to A2-32 [User Parameter 1 to User Parameter 32] . This lets
you quickly access and change these parameters.
Note:
Setup mode always shows ( A1-06 [Application Selection] ) at the top of the list. When you change the setting, the settings
for A2-01 to A2-32 change. You can easily view and set the necessary parameters.
Figure 4.17 View and Set the Necessary Parameters
Continue to change the parameters or press and hold to go back to the frequency reference screen.
◆
Change Parameter Settings
Show the frequency reference screen in advance.
Note:
Push and hold to go back to the frequency reference screen from any screen.
This example shows how to change C1-01 [Acceleration Time 1] . Set the parameter to the necessary value.