YASKAWA
SIEP C730600 83E CC-Link Technical Manual
17
NOTICE
Do not pinch cables between the front covers and the drive. Failure to comply could cause
erroneous operation.
A - Drive front cover
B - Keypad
C - Drive terminal cover
Figure 5.8 Replace the Front Cover, Terminal Cover, and Keypad
8.
Set drive parameters in
Related Drive Parameters on page 23
for correct option performance.
■
Procedure B
This section shows the procedure to install and wire the option on a GA700 or GA800 drive.
Prepare the Drive for the Option
Correctly wire the drive as specified by the manual packaged with the drive. Make sure that the drive functions
correctly. Refer to the drive manuals for more information.
A - Insertion point for CN5 connector
B - Option
C - Included screws
D - Drive front cover
E - LED label
F - Keypad
G - Option modular connector CN1
H - LED Status Ring board
I - Connector CN5-A
J - Connector CN5-B (Not available for
communication option installation.)
K - Connector CN5-C (Not available for
communication option installation.)
Figure 5.9 Drive Components with Option
Install the Option
Use this procedure to install the option.
