The next start-up takes place without requesting the log-in data.
The
‘Enhanced Write Filter’
is a tool which can be used to disable permanent writing
accesses to the internal drive "C:". It can be written to the drive but the data is not stored
permanently.
1.
Open the configuration window of the Enhanced Write Filter by clicking icon in
the system tray.
2.
In the next window click on [Configure].
3.
In the following window select
enable
under
‘Pending command’
to enable the
Enhanced Write Filter.
4.
Confirm with [Apply] and [OK].
5.
To disable the Enhanced Write Filters select
Commit and disable live
under
‘Pending command’
.
Please note that a status change of the Enhanced Write Filter will only
take effect after a restart of the system.
Enhanced Write Filter
VIPA HMI
Deployment Panel PC
Operating system Windows Embedded Standard 7 > Structure
HB160 | PPC | 67P-RSL0 | en | 20-20
36
Summary of Contents for 67P-RSL0
Page 1: ...PPC 67P RSL0 Manual HB160 PPC 67P RSL0 en 20 20 VIPA HMI Panel PC PPC015 ES...
Page 13: ...VIPA HMI Hardware description Structure Interfaces HB160 PPC 67P RSL0 en 20 20 13...
Page 67: ...Appendix VIPA HMI Appendix HB160 PPC 67P RSL0 en 20 20 67...
Page 68: ...Content A History of changes 69 VIPA HMI Appendix HB160 PPC 67P RSL0 en 20 20 68...
