2.4 Dimensions
For the installation of the Touch Panel in control cabinets and desks the following dimen-
sions are necessary:
Front panel width
1.5 ... 6mm
Installation cutting (W x H)
287 x 217mm
Front panel (W x H)
304 x 233mm
Rear panel (W x H x D)
285 x 215 x 45mm
Installation depth
45mm
The degrees of protection are only guaranteed when the following is
observed:
–
Material thickness at the mounting cut-out: 1.5 ... 6mm
–
The deviation from the plane for the panel cut-out is
£
0.5mm. This
condition must be fulfilled for the mounted HMI device.
–
Permissible surface roughness in the area of the seal:
£
120µm (fric-
tion coefficient 120)
Installation dimensions
10.4" - 62K-JID0-...
VIPA HMI
Hardware description
Dimensions
HB160 | TP | 62K-JID0 | en | 20-20
14
