34
Avery Inst 7 - Attach Gable Ends
Avery Inst 7 - Attach Gable Ends
A:
On one side of the assembly place two (471) Gable Ends against the outside (468) Rafters so the peaks meet
in the centre and they are tight and flush to the top and edge of (477) Gable Upright Front
. Bottom of (471) Gable
End to bottom of (468) Rafter should measure 1” all along each (471) Gable End. Attach with ten #8 x 1-3/4”
Wood Screws per (471) Gable End. (fig. 11.1, 11.2 and 11.3)
B:
Repeat for the other side of the assembly.
Fig. 11.1
Flush
and Tight
Hardware
40 x #8 x 1-3/4” Wood Screw
Step 11: Attach Gable Ends
Fig. 11.2
Wood Parts
4 x (471) Gable End
(471)
Gable End
#8 x 1-3/4” Wood Screws
(10 per Gable End)
(415)
Gable End
(415)
Gable End
(471)
Gable End
Tight
(477) Gable
Upright Front
1”
(471)
Gable End
(477) Gable
Upright Front
x 2
(468)
Rafter
Fig. 11.3
Side View
