Introduction of Scale
Battery Installation
Flip the battery compartment
cover as the picture showed
direction.
1
Install batteries according to
the picture show.
2
Remark:
1.Please place the scale on a hard and flat ground, not on soft or uneven ground, such
as mats, blankets etc., so as not to affect the accuracy of the measurement result.
2.The body report is for reference only, not as a medical opinion.
3.The scale will turn on automatically if the body weight is higher than 5KG. If the weight
is lower than 5KG, it can not be awakened.
Remark: When scale battery power to low, it show “Lo” and cannot be weighed
normally. Please replace the battery as soon as possible.
Basic Parameter
Product Name: Smart body scale
Product Model Name: SW1
Product Size: 280*280*25mm
Product Weight: 1.3KG
Measurement Capacity: 5KG ~ 150KG
Accuracy: 50g
Battery Type: 4 x AAA battery
Connection Technology: Bluetooth
Working Temperature: -10～45°C
Note: Please read this manual carefully before using the product and keep it properly.
Please remove the battery compartment cover on the
back of the scale, insert 4 AAA batteries, and then
place the scale on a flat ground. The display shows
0.00.
Digital Display Instruction
During weighing, the number flashes 3
times, indicating that the weight is
stable and the weighing is over.
Low Power Status
Digital Display
Non-slip rubber pad
Battery Cover
Firmware upgrade status
Overweight Status
Smart Body Scale
Quick Start Manual
