ZT370 Operation Manual
9
ZT370 Operation Manual
PRODUCT
OVERVIEW
OVERVIEW
Owner/Operator Responsibilities
The operator must, and assumes all
responsibility to:
• Read and understand the operation
manual prior to operating the stern drive;
• Perform all safety checks as necessary
to ensure safe operation;
• Comply with and follow all lubrication
and maintenance instructions and
recommendations; and
• Have an authorized Yanmar Marine
dealer/distributor perform periodic
checkups.
Conducting normal maintenance service
and replacing consumable parts as
necessary is the responsibility of the
owner/operator and necessary to provide
the best durability, performance and
dependability of the stern drive while
keeping your overall operating expenses
to a minimum. Individual operating habits
and usage may increase the frequency of
performing maintenance service condition.
Monitor conditions frequently to determine
if the maintenance intervals suggested in
the manual are frequent enough for stern
drive.
NOTICE
The anode of the stern-drive is only
calculated for the stern-drive. Changing
the material of the propeller may require
additional anodes to be installed on the
stern-drive.
New Stern-Drive Break-In:
• On the initial engine start-up, allow the
engine to idle for approximately 15
minutes while you check for proper
stern-drive function and stern-drive oil
leaks.
• During the break-in period, carefully
observe stern-drive indicators (if any) for
proper stern-drive function.
• During the break-in period, check the
stern-drive oil levels frequently.
ZT370_OM.book 9 ページ ２０１３年９月２７日 金曜日 午前１０時１６分
