Yanmar neoTower, Operation Manual

Page: 7 / 44

RMB/ENERGIE GmbH | 7
Safety information
Operation manual CHP 5.0 - 30.0 | Status 01.2020
2.3 General safety instructions
D
WARNING!
Hazard caused by failing to observe the manual!
This manual contains important information for handling
the system safely. Potential hazards are specifically
highlighted. Failing to observe such information can
lead to death or severe injuries.
A
Read the manual carefully.
A
Follow the safety instructions contained in this
manual.
A
Follow the safety instructions on the system
A
Store the manual in an accessible place.
If you can smell gas, immediately proceed as follows:
B
Close the gas valve.
B
Do not generate any naked flames.
B
Do not operate any electrical switches
(e.g. light switches, all-pole separating points).
B
Do not use any electrical appliances in the
hazardous area (e.g. telephone).
B
Ventilate the rooms.
B
Inform the manufacturer, gas utility company or
qualified service company.
Use of the system is prohibited in the following cases:
B
If the system or individual components are
damaged.
B
If the system has been altered or modified without
authorisation.
B
If the supply and return lines (e.g. gas, flue gas,
water, electricity, condensate drain) are altered or
modified without authorisation.
B
If any safety devices are missing or inoperable.
D
“3.4 Safety devices” (page 9).
B
During the construction phase of the building.
B
If the system has been in storage for more than
5 months after delivery.
D
“4. Storage” (page 13).
B
If the system has been decommissioned for more
than 5 months.
B
For children or individuals who are incapable of
assessing the hazards associated with operating
the system.
The manufacturer does not accept any liability or
guarantee for damage or loss in the following cases:
B
Failing to observe this manual.
B
Contrary-to-intended use.
B
Improper handling.
B
Use by unauthorised target groups.
B
Failing to meet the installation location
requirements.
B
Using replacement parts that have not been
authorised by the manufacturer.
B
Bypassing the system’s safety devices.
B
Removing the system’s seals and sealants.
B
Failing to comply with the maintenance intervals.
Additional safety instructions are provided in the
respective chapters of this manual.
D
“4. Storage” (page 13).
D
“5. Assembly” (page 14).
D
“6. Commissioning” (page 29).
D
“7. Operating” (page 30).
D
“8. Cleaning” (page 31).
D
“9. Service repairs” (page 32).
D
“10. Disassembly” (page 33).
D
“11. Disposal” (page 34).