Yanmar B95W, Operating Instructions Manual

Page: 38 / 310

B95W
Safety
36 / 306
3
03_Sicherheit_en.fm - V 0.1 - 1.8.17
46
3.13 Working operation
‹
Before commencing work each day and whenever work attachments are
changed, a check must be carried out to ensure that the work attachment is
correctly fastened and that the quick-attach system is properly locked. Move
the working attachment carefully at a low height. Nobody must be allowed to
remain in the danger zone during this check.
‹
Load the machine in such a manner, that it is not overloaded and no material
is lost while the machine is driving.
‹
Make sure nobody is standing within the danger zone of the machine.
‹
At dumping points, the machine may only be operated if suitable measures
have been taken to prevent rolling or falling.
‹
The machine’s area of rotation must be fully visible to the driver.
‹
Ensure that you do not swing loading equipment back and forth.
‹
In case of danger, turn off the engine so that the load completely stops moving.
‹
The operator is responsible for ensuring that the cab is fitted with the protective
grating, when conditions require it.
‹
Do not raise the outrigger when the machine is raising a load. Only raise the
outrigger when the uppercarriage and the digging tool are in the driving
position.
3.14 Operating under the risk of falling objects
‹
If dangers are posed by falling objects, only use the machine if the driver's
seat is protected by a canopy roof (FOPS – Falling Object Protection
Structure). A front guard must be employed if there is a risk of materials
breaking through into the cab.
‹
When working in front of walls with stacks of materials, for example, position
the machine in such a way that the driver’s seat and access stairs face the
other side (so they are not blocked).
‹
Only use the machine for demolition work if no persons are endangered and
if the machine is equipped with a canopy (FOPS) and front protection has
been mounted on the operator's stand. See regulations book “Demolition
work” (BGI 665) published by the German Tiefbau-Berufsgenossenschaft
(Civil Engineering Employer’s Liability Insurance Association).
‹
Demolition work is only to be performed according to proper use by machines
where there is no danger to persons and if the machine is equipped with
canopy, cab-mounted windshield and the appropriate work attachment. See
regulations book “Demolition work” (ZH 1/614) published by the Tiefbau-
Berufsgenossenschaft (Civil Engineering Employer's Liability Insurance
Association).
‹
Only use the machine with the log clamp if no persons are endangered and
if the machine is equipped with a canopy (FOPS) and a front guard has been
mounted on the operator's compartment.
‹
When using the hammer, close the windows and doors.