Yanmar 4BY2 Operation Manuals Download

Page: 7 / 88

INTRODUCTION

Welcome to the world of Yanmar Marine!

Yanmar Marine offers engines, drive

systems and accessories for all types of

boats, from runabouts to sailboats, and from

cruisers to mega yachts. In marine leisure

boating, the worldwide reputation of Yanmar

Marine is second to none. We design our

engines to respect nature. This means

quieter engines, with minimal vibrations,

cleaner than ever. All of our engines

designed after 1996 meet most of the

present and future emission regulations,

such as BSO II, SAV, EPA II, IMO and RCD.

To help you enjoy your Yanmar BY2 engine

for many years to come, please follow these

recommendations:

• Read and understand this Operation

Manual before you operate the machine to

ensure that you follow safe operating

practices and maintenance procedures.

• Keep this Operation Manual in a

convenient place for easy access.

• If this Operation Manual is lost or

damaged, order a new one from your

authorized Yanmar marine dealer or

distributor.

• Make sure this manual is transferred to

subsequent owners. This manual should

be considered a permanent part of the

engine and remain with it.

• Constant efforts are made to improve the

quality and performance of Yanmar

products, so some details included in this

Operation Manual may differ slightly from

your engine. If you have any questions

about these differences, please contact

your authorized Yanmar marine dealer or

distributor.

• The specifications and components

(instrument panel, fuel tank, etc.)

described in this manual may differ from

ones installed on your vessel. Please refer

to the manual provided by the

manufacturer of these components.

• Refer to the Yanmar Limited Warranty

Handbook for a complete warranty

description.

BY Series Operation Manual

Summary of Contents for 4BY2

























































































Search results

Summary of Contents for 4BY2

Reviews:

Related manuals for 4BY2

Brands by name

Popular brands

Yanmar 4BY2, Operation Manuals

Search results

Summary of Contents for 4BY2

Reviews:

Related manuals for 4BY2

Brands by name

Popular brands