Yanmar 2TNV70, Operation Manual, Page: 57 / 142

BEFORE YOU OPERATE
TNV Operation Manual 39
Figure 4
Adding Engine Oil
1. Make sure engine is level.
2. Remove oil cap (Figure 4, (4)) .
3. Add indicated amount of engine oil at the top
or side engine oil filler port (Figure 4, (5)) .
4. Wait three minutes and check oil level.
5. Add more oil if necessary.
6. Reinstall oil cap (Figure 4, (4)) and hand
tighten. Over-tightening may damage the cap.
Engine Oil Capacity (Typical)
Note: These are the engine oil capacities
associated with a “Deep Standard” oil
pan. Oil capacity will vary dependant
upon which optional oil pan is used.
Refer to the operation manual provided
by the driven machine manufacturer for
the actual engine oil capacity of your
machine.
The following are the engine oil capacities for
various Yanmar TNV engines.
(4)
(5)
(1)
(2)
(3)
0000587A
(4)
0000007B
(4)
(3)
(1)
(2)
(4)
(5)
Engine Oil Capacity
Engine Model
Dipstick Upper
Limit/ Lower Limit
2TNV70(VM)
1.7 / 0.9 qt
(1.6 / 0.8 L)
2TNV70(CH)
2.4 / 1.4 qt
(2.3 / 1.3 L)
2TNV70(VH)
1.7 / 0.8 qt
(1.6 / 0.8 L)
3TNV70(CL),
3TNV70(VM)
3.0 / 1.6 qt
(2.8 / 1.5 L)
3TNV70(CH)
3.7 / 2.1 qt
(3.5 / 2.0 L)
3TNV70(VH)
3.0 / 1.6 qt
(2.8 / 1.5 L)
3TNV76(VM)
3.6 / 1.9 qt
(3.4 / 1.8 L)