YZ-S5
13
Chapter 5 Maintenance
Machine life and operational safety must be ensured by proper and routine
maintenance of the machine. The routine maintenance requirements are tabulated
below. Under suitable operating conditions, the maintenance interval can be changed
and must be determined by the professional responsible for the maintenance.
To perform maintenance operations, the machine must be stopped (remove the
start switch key), so please read the safety section of the manual carefully.
Conditions of Use
●Ambient temperature
℃
: -10
℃～
40
℃
;
●The relative humidity of air
℃
: 5%
～
70%;
●No conductive dust, no explosion hazard environment;
● An environment that does not contain gases or vapors that corrode metals;
●Indoor use, ventilated, non-vibration environment, front and rear space at least
300mm;
Maintenance schedule
Warranty
maintenance operation
On handover
Every 10h
Every 50h
Every 100h Every 200h Every 500h
Side brush and main brush high ℃
adjustment check
Whetherthemainandsidebrushesare
wiredorentangled
Complete inspection of garbage
filter cleaning
High ℃ of stopper and operation
inspection
refueling hole
Vibration filter inspection
Main brush drive belt visual
inspection
Screw and nut tightening inspection
Follow-up stop brake pedal check
adjustment
Checkthemainand sidebrushesfor
wear
Main brush drive belt replacement
Main brush and drive system motor
carbon brush inspection and
replacement
Summary of Contents for YZ-S5
Page 1: ...YZ S5 Floor Sweeper operation instructions ...
Page 2: ...YZ S5 Yangzi Make cleaning easier ...
Page 18: ...YZ S5 1 ...
