YANGZI YZ-S5, Operation Instructions Manual

Page: 10 / 18

YZ-S5
8
●Press the dust vibrating button to vibrate the filter.
●Empty the trash
●Remove the key from the power switch.
●When the machine stops working, the brush must be lifted to prevent the brush from
being deformed.
Machine storage and maintenance
●If the machine will not be used within 30 days, store the machine in a clean and dry
place and disconnect the battery connector.
Chapter 3 Routine Maintenance and
Replacement of Wearing Parts
3.1 Periodic Inspection
Regular maintenance and inspection
Intervals（h）
4
50 100 200 500
1 Battery level detection
2 Motor carbon brush inspection
3
Whetherthemainbrushiswired,thesilkisentangled
4 Check for debris in the tank
5
Check the buttons and electronics on the
control panel
6
Check the brush for wear
7 Check the filter for impurities
8
Check the sprinkler joint for leaks
3.2 Replacement and installation of main brush
● Ensure that the machine is in a stationary state;