14
2. Before operating the unit
Installation procedures
8.Connect the membrane filter firmly.
※
●
Install the membrane filter as follows.
●
Connect firmly. Otherwise, water may leak through the threaded portion.
(1) Select the membrane filter and seal tape from accessories of the main body.
(2) Pay attention to the arrow direction of membrane filter and wind the seal tape, clockwise
as viewed from the winding side, by two to three turns while giving slight tension. Cut
off any surplus tape. In this case, start winding of the seal tape while keeping about two
leading threads free.
(3) With the seal-taped portion on top, screw in the membrane while taking care not to
damage threads. Check for leakage in the course of sampling of pure water. If not,
screw in further.
Keep the seal tape in storage and do not lose it because it will be necessary at a time of
membrane filter.
9. After installation
This product may overturn to cause injury due to unexpected earthquake and impact.
Provide appropriate measure to prevent overturn to ensure the safety.
Summary of Contents for Pure Line Series
Page 2: ......
