57
5. Handling precautions
Warnings and Cautions
8. Do not climb on the Equipment.
Do not climb on this Equipment. May cause personal injury and/or its failure by tipping it over
and being damaged.
9. Do not place any stuff on the Equipment
Do not place any stuff on this Equipment. May cause personal injury falling it off.
Do not close up any flammable materials such as paper around it.
10. Turn immediately off the Breaker of the Equipment at thundering.
Turn immediately off the Breaker of the controller, when thundering and lightning start. If do not
so, it may cause fire or electric shock by the thunderbolt.
11. Do not keep Door open after operation.
Do not keep Door open to cool the sample down quickly, etc. right after operation. May deform
Control Panel and cause failure of this Controller by heat wave from Chamber.
12. Do not process any corrosive samples.
Do not process any samples containing corrosive chemicals even though Chamber is made of
stainless steel which this steel may be corroded by strong chemical acid, etc.
13. Operate at the proper temperature
Operating temperature range will be room temperature15
℃～
260
℃（
at forced wind
）
and room
tempe25
℃～
120
℃（
at natural conve ction
）
.
Never operate this Equipment at temperature out of its range. Operating the unit outside the
operating temperature range may cause a malfunction of the unit or an accident.
14. Take extreme care when placing samples.
Do not set samples heavier than 15kg. Weight capacity of one shelf will be about 30kg
Spread samples evenly throughout on each shelf as many as possible.
Do not set excessive amount of samples on shelves. Chamber temperature may not be
controlled correctly. Must keep following procedure to control Chamber temperature correctly;
1) install the supplied shelves, 2) keep space between samples as wide as possible. 3) require
space opening more than 30% at each shelf.
Require space opening more than 30% at each shelf.
15kg
Shelf
Sample
