Yamato DKM300C Manual Download Page 13

Page: 13 / 44

3. Names and functions of parts

Operation panel

M EASURED TEM P.

℃

HEATER

RUN

SET TEM P.

RU N

STO P

TIM ER

SUB M ENU

No.

Name

Operation/action

①

RUN/STOP key

Used for starting/stopping operation.

②

▼▲

key

Used for selecting settings.

③

TIMER key

Key for selecting timer operation settings.
Quick auto stop operation, auto stop operation or auto start
operation can be selected.

SUB MENU key
(Long press of the TIMER
key)

Key for setting calibration offset temperature, the key lock
function or the power outage compensation function.

④

RUN lamp

Illuminates during fixed temperature operation and blinks
during timer operation.

⑤

HEATER lamp

Illuminates while heater power is on.

⑥

MEASURED TEMP.
screen

Displays measured temperature in the bath/set characters/
alarm information.

⑦

SET TEMP. screen

Displays a set temperature, timer settings and timer remaining
time.

⑤

④

⑥

⑦

①

②

③

Summary of Contents for DKM300C













































Search results

Summary of Contents for DKM300C

Reviews:

Related manuals for DKM300C

Brands by name

Popular brands

Yamato DKM300C, Manual

Search results

Summary of Contents for DKM300C

Reviews:

Related manuals for DKM300C

Brands by name

Popular brands