22
4. Operating Procedures
Operation steps
（
Auto Stop operation
）
How to start Auto Stop
operation
This is used when you "want to stop Fixed Temp operation automatically
after set time from the beginning of that operation
”.
MEASURED TEMP.
℃
HEATER
ENTER
SET
TEMP.
OVER TEMP .
RUN
STOP
SUB
MENU
TIMER
FIXED
TEMP.
PROGRAM
PROTECTOR
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
PROGRAM
MEASURED TEMP.
℃
HEATER
ENTER
SET
TEMP.
OVER TEMP .
RUN
STOP
SUB
MENU
TIMER
FIXED
TEMP.
PROGRAM
PROTECTOR
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
PROGRAM
1. Setting a stop time
①
In the initial screen, press
TIMER
key.
②
The set temperature indicator will show the timer mode that you
used in the last session.
Pressing
TIMER
key again will make the timer mode flash.
Pressing
TIMER
key again will make the next timer mode flash.
Select the character AStP
that means the Auto Stop
operation and press
ENTER
key.
The character Sv
that means the temperature setting is
displayed on the measured temperature indicator while the
current set temperature and the Auto Stop lamp will flash on the
set temperature indicator.
③
Press
▽
and
△
keys to set a temperature you want.
④
Press
ENTER
key. The character tim
that means the
timer is displayed on the measured temperature indicator and the
current set time will flash on the set temperature indicator.
⑤
Use
▽
and
△
keys to set a time you want.
About the timer function
Maximum settable time for the timer is 999 hours 50 minutes.
Time can be set in the unit of minutes up to 99 hours 59 minutes.
Time period 100 hours and longer shall be set in the unit of 10 minutes.
You can continuously change set time and change to the setting you
want quickly by keeping
▽
and
△
keys pressed. Press
▽
and
△
keys once at a time to fine adjust a time.
MEASURED TEMP.
℃
HEATER
ENTER
SET
TEMP.
OVER TEMP .
RUN
STOP
SUB
MENU
TIMER
FIXED
TEMP.
PROGRAM
PROTECTOR
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
PROGRAM
2.Starting the Timer operation
When you have set a time you want, keep
RUN/STOP
key pressed for
about one second.
Timer operation starts with the Auto Stop lamp is lit.
The timer will start when the in-bath temperature (measured
temperature) reaches the set temperature.
Summary of Contents for DKG610
Page 2: ......
