Yamatake SDC35, User Manual

Page: 33 / 280

Chapter 2. OUTLINE OF FUNCTIONS
2 - 1 Input/Output Configuration
2-1
●
PV input
Sensor or range is selected for the PV input. When the PV input is the DC voltage
or DC current, the PV scaling high limit/low limit can be set.
●
Control output
output). When the model has two control outputs, the heat/cool control can be
used only with "Basic configuration".
When the control output type of the model is “R1: Position proportional
MFB”, the position proportional control can be performed using two relays.
●
Event output
When the model provides the event, the alarm or control mode set in [Event type]
can be output as digital output (DO).
●
Digital input (DI)
When the model provides the DI, the function set with the DI assignments can be
selected.
●
Current transformer (CT) input
When the model provides the CT input, the heater burnout alarm can be output
from the event output.
●
Remote SP (RSP) input
When the model provides the RSP input, the range of the RSP input can be
selected and the RSP input range scaling low limit/high limit can be set.
●
Motor Feed Back (MFB) input
When the model provides the position proportional output, the feedback data of
the modutrol motor opening can be input.
!
"#$
%&
%&
'%
'%
(##
%)
%
"#$