Yamatake SDC35, User Manual

Page: 20 / 280

Setup of PV input range type
Setup of event operation type
Press [display] once
to get the operation
display. Press and hold
[para] for more than
2s to get the para-
meter setup display.
MOde
flashes on the
upper display.
Press [ ] or [ ]
repeatedly to get
evCf
flashing on the
upper display.
Press [enter] to get
e 1.c 1
on the upper
display and
0
is
displayed on the
lower display.
When [enter] is
pressed, the right-
most digit on the
lower display flashes.
Press [ ] or [ ] to
get
4
flashing on the
display.
Press [enter], and
the displayed value
4
on the lower
display changes
from flashing to
continuously lit and
the displayed value
is set.
In this example, the event 1 operation type is set to
deviation high limit.
Similarly, use
e2.C 1
to set the event 2 operation type, and
use
e3.C 1
for event 3.
<
<
<
<
0
on the lower display
indicates that the event
operation type is set to
"none."
4
on the lower display
indicates that the event
operation type is
set for deviation high limit.