background image

1

2

3

4

5

6

7

8

9

3-3

EAU1044E

INSTRUMENT AND CONTROL FUNCTIONS

EAUT1934

Engine trouble warning light “

This warning light fl ashes or stays on 
if an electrical circuit monitoring the 
engine is not working correctly. If this 
occurs, have a Yamaha dealer check 
the self-diagnosis system.
The electrical circuit of the warning 
light can be checked by turning the 
key to “ON”. The warning light should 
come on for a few seconds, and then 
go off.
If the warning light does not come 
on initially when the key is turned to 
“ON”, or if the warning light remains 
on, have a Yamaha dealer check the 
electrical circuit.

EAUT1821

Speedometer unit

1

2

1. Speedometer
2. Odometer

The speedometer unit is equipped 
with a speedometer and an odometer. 
The speedometer shows the riding 
speed. The odometer shows the total 
distance traveled.

EAU12140

Fuel gauge

1

1. Fuel 

gauge

The fuel gauge indicates the amount 
of fuel in the fuel tank. The needle 
moves towards “E” (Empty) as the 
fuel level decreases. When the needle 
reaches “E”, refuel as soon as pos-
sible.

TIP

Do not allow the fuel tank to empty it-
self completely.

5(KPFF

ࡊࡠ࠮ࠬࠪࠕࡦ ࡊࡠ࠮ࠬࡑ࠯ࡦ࠲ࡊࡠ࠮ࠬࠗࠛࡠ࡯

ࡊࡠ࠮ࠬࡉ࡜࠶ࠢ

Summary of Contents for Zuma YW125A





























































































Reviews: