Yamaha ZUMA 125 Owner'S Manual Download Page 28

Page: 28 / 96

Instrument and control functions

4-12

EAUT5020

Passenger footrest

To use the passenger footrest, move
the footrest downward as shown.

To retract the passenger footrest, move
it back to its original position.

EAU14302

Helmet holder

The helmet holder is located under the
seat.

To secure a helmet to the helmet
holder

1. Open the seat. (See page 4-11.)
2. Attach the helmet to the helmet

holder, and then securely close the
seat.

WARNING! Never ride with

a helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.

[EWA10162]

To release the helmet from the hel-
met holder

Open the seat, remove the helmet from
the helmet holder, and then close the
seat.

1. Passenger footrest

1. Helmet holder

BC9-9-14E0.book 12 ページ２０１９年５月８日　水曜日　午後１時２２分

Summary of Contents for ZUMA 125

































































































Search results

Summary of Contents for ZUMA 125

Reviews:

Related manuals for ZUMA 125

Brands by name

Popular brands

Yamaha ZUMA 125, Owner'S Manual

Search results

Summary of Contents for ZUMA 125

Reviews:

Related manuals for ZUMA 125

Brands by name

Popular brands