Periodic maintenance and adjustment
7-9
7
EAU18782
Removing and installing cowl-
ings
The cowlings shown need to be re-
moved to perform some of the mainte-
nance jobs described in this chapter.
Refer to this section each time a cowl-
ing needs to be removed and installed.
EAU93130
Cowling A and B
To remove the cowling
1. Remove the bolts, washers and
the quick fastener screws, and
then pull cowling A off as shown.
2. Remove the bolts and nut, and
then pull cowling B off as shown.
To install the cowling
1. Place cowling B in its original po-
sition, and then install the bolts
and nut.
2. Fit the upper projections into the
slots, and then place cowling A in
its original position.
3. Install the bolts, washers and the
quick fastener screws.
1. Cowling A
2. Cowling B
1
1
1
2
1. Bolt and washer
2. Bolt
3. Quick fastener screw
1. Bolt
2. Nut
1
1
1
3
3
2
1
1
1
1
1
2
2
UBEB20E0.book Page 9 Monday, September 6, 2021 11:24 AM
