Yamaha YZF-R7 2022 Owner'S Manual Download

Page: 79 / 100

Perio

ic maintenance an

justment

7-28

EAUM1653

ricatin

the swin

arm piv-

ots

The swingarm pivots must be lubricat-
ed by a Yamaha dealer at the intervals
specified in the periodic maintenance
and lubrication chart.

EAU23273

Checkin

the front fork

The condition and operation of the
front fork must be checked as follows
at the intervals specified in the periodic
maintenance and lubrication chart.

To check the con

ition

Check the inner tubes for scratches,
damage and excessive oil leakage.

To check the operation

1. Place the vehicle on a level surfa-

ce and hold it in an upright posi-
tion.

WARNING! To avoi

injury,

securely support the vehicle so
there is no

er of it fallin

over.

[EWA10752]

2. While applying the front brake,

push down hard on the handle-
bars several times to check if the
front fork compresses and re-
bounds smoothly.

NOTICE

ECA10591

If any

ama

e is foun

or the front

fork

oes not operate smoothly,

have a Yamaha

ealer check or re-

pair it.

Recommen

ricant:

Lithium-soap-based grease

UBATEZE0.book Page 28 Monday, December 14, 2020 1:08 PM

Summary of Contents for YZF-R7 2022





































































































Search results

Summary of Contents for YZF-R7 2022

Reviews:

Related manuals for YZF-R7 2022

Brands by name

Popular brands

Yamaha YZF-R7 2022, Owner'S Manual

Search results

Summary of Contents for YZF-R7 2022

Reviews:

Related manuals for YZF-R7 2022

Brands by name

Popular brands