Yamaha YZF-R3, Owner'S Manual

Page: 80 / 100

Perio d ic maintenance an d a d justment
7-32
7
EAU39014
Replacin g a hea d li g ht b ul b
This model is equipped with halogen
bulb headlights. If a headlight bulb
burns out, replace it as follows.
NOTICE
ECA10651
Take care not to d ama g e the follow-
in g parts:

Hea d li g ht b ul b
Do not touch the g lass part of
the hea d li g ht b ul b to keep it free
from oil, otherwise the transpar-
ency of the
g lass, the luminosity
of the b ul b , an d the b ul b life will
b e a d versely affecte d . Thor-
ou g hly clean off any d irt an d fin-
g erprints on the hea d li g ht b ul b
usin g a cloth moistene d with al-
cohol or thinner.

Hea d li g ht lens
Do not affix any type of tinte d
film or stickers to the hea d li g ht
lens.
Do not use a hea
d li g ht b ul b of a
watta g e hi g her than specifie d .
1. Remove the headlight bulb cover
by turning it counterclockwise.
2. Disconnect the headlight coupler.
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
5. Connect the headlight coupler.
1. Do not touch the glass part of the bulb.
1. Headlight bulb cover
1
1. Headlight coupler
1. Headlight bulb holder
1
1
UB0220E0.book Page 32 Tuesday, March 3, 2015 9:20 AM