Yamaha YZF-R1, Service Manual

Page: 354 / 808

CRANKCASE
5-71
EAS20059
CRANKCASE
Removing the crankcase breather cover and switches
*
Following the tightening order, loosen the bolt one by one, and then retighten it to the specific
torque.
**
Apply Three Bond No. 1215B®
Order Job/Parts to remove Q
’
ty Remarks
Engine Refer to “ENGINE REMOVAL” on page 5-11.
Cylinder head cover/Intake camshaft/Exhaust
camshaft
Refer to “CAMSHAFTS” on page 5-18.
Cylinder head Refer to “CYLINDER HEAD” on page 5-33.
Generator rotor Refer to “GENERATOR” on page 5-44.
Starter motor
Refer to “ELECTRIC STARTER” on page
5-50.
Water pump Refer to “WATER PUMP” on page 6-13.
Clutch housing assembly Refer to “CLUTCH” on page 5-60.
Oil strainer/Oil pump/Relief valve assembly Refer to “OIL PUMP” on page 5-54.
FWD FWD
70 N
・
m (7.0 k g f
・
m, 52 lb
・
ft)
LT
LT
LT
LT
4.0 N ・ m (0.40 k g f ・ m, 3 .0 lb ・ ft)
1. 8 N ・ m (0.1 8 k g f ・ m, 1. 3 lb ・ ft)
10 N ・ m (1.0 k g f ・ m, 7.4 lb ・ ft)
10 N ・ m (1.0 k g f ・ m, 7.4 lb ・ ft)
12 N
・
m (1.2 k g f
・
m, 8 .9 lb
・
ft)
1 3 N ・ m (1. 3 k g f ・ m, 9.6 lb ・ ft)
17 N ・ m (1.7 k g f ・ m, 1 3 lb ・ ft)
1 s t
2nd
6 N
・
m (0.6 k g f
・
m, 4.4 lb
・
ft)
3 .0 N ・ m (0. 3 0 k g f ・ m, 2.2 lb ・ ft)
S pecified an g le 90˚
*
17 N ・ m (1.7 k g f ・ m, 1 3 lb ・ ft)
**
( 8 )
E