Instrument and control functions
4-39
1
2
3
4
5
6
7
8
9
10
11
12
To install the rider seat
1. Insert the projections into the seat
holders as shown, then place the
seat in the original position.
2. Install the bolts with the hexagon
wrench.
3. Insert the hexagon wrench back
into its holder.
4. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
EAU67156
CCU (for equipped models)
The CCU (communication control unit)
connects to the vehicle’s CAN (control-
ler area network) and has a GPS re-
ceiver to enable the recording of
vehicle and riding data (see “Logging”
on page 4-22). Logging data and YRC
setting data can be accessed when a
smartphone or tablet is connected to
the CCU wireless network.
TIP
From the Google© or Apple© applica-
tion store, download the “Y-TRAC” ap-
plication to make use of the logging
data and the “YRC Setting” application
to remotely adjust the YRC settings.
To connect to the CCU wireless net-
work
1. Remove the screws, move the
GPS receiver, and then remove
the seat cover as shown.
1. Bolt
1. Hexagon wrench
1
1
1. Projection
2. Seat holder
1
2
BX4-9-E1_1.book 39 ページ ２０１８年４月２７日 金曜日 午後４時３分
